A fault plane on its own tells you its attitude. Add the striation on it and the direction the hanging wall moved, and it tells you which way the rock around it was shortened and which way it was stretched. That makes fault-slip data some of the most useful measurements a field geologist can take, and some of the easiest to over-interpret, because the calculation gives a tidy answer whether or not the faults belong together.
Learning goals
By the end of the lab, students can:
- explain how a fault plane, its slickenline and its sense of slip give a P and a T axis
- explain what P and T axes are, and why they are not the same thing as stress axes
- run a fault kinematic analysis in software and read its summary statistics
- recognize when a set of faults contains more than one kinematic population, and separate them
- compare their result with a published interpretation and say where the data stop and the argument starts
Materials
- The Blythe CSV file, 128 faults (download below)
- A laptop with Stereogram Pro open in a browser
About the data
The faults cut the desert ranges around Blythe, from the Palen and McCoy Mountains in California to a few outcrops across the Colorado River in Arizona. A USGS-led team measured 642 fault planes there, 512 of them with slickenlines, and published every measurement alongside a paper in Geosphere (Mavor and others, 2023). The file for this lab keeps the 128 faults that have a slickenline and a sense of slip the geologists saw directly at the outcrop: offset markers, slickenfiber steps, trailed material. For most of the others the sense was inferred from nearby map relations, and those are left out.
Strikes follow the right-hand rule. The slickenline is given as a trend and plunge. Kinematic sense is spelled out in words, including oblique combinations such as normal-dextral, where the first word is the larger component. Sense confidence is the geologists’ own rating, from 0.5 (weak) to 3 (certain), and Sense indicator says what they saw.
P and T are strain axes, not stress axes. Each fault’s P axis is the direction that fault shortened the rock, and its T axis the direction it lengthened it. They come from geometry alone. The principal stresses can sit at quite different angles, because real faults often reactivate old surfaces instead of forming at the ideal angle, so resist the temptation to write σ1 where you mean P.
From a fault to P and T
Figure 1 shows the construction for a fault that is not in the file. The movement plane is the plane that contains both the slip direction and the pole to the fault; for a fault with pure dip-slip it is vertical and strikes down the dip. P and T both lie in the movement plane, each 45° from the slickenline, and the sense of slip decides which is which. The software does this for every fault in the file.
- Fault plane
- Movement plane
- P axis
- T axis
- Slickenline
Part 1 Import and check 20 min
- Open Import, choose Import Data and pick the CSV file.
- On the column-matching step, leave Right-hand rule (strike / dip) selected. Check that Slickenline trend and Slickenline plunge went to Trend and Plunge, and that Kinematic sense went to Kinematic Sense. Import Sense confidence as a number.
- Create an Analysis data set with the + button in the Analysis data sets header, name it All faults, and drag the whole dataset onto it.
- From the tool menu choose Fault Kinematic Analysis, drag the fault planes from All faults into Drop fault planes (the slickenlines follow on their own) and press Run.
Questions
- 1.1Before running anything, use the tree’s Type filter with Kinematic switched on. How many faults does it keep? Why is it worth checking this number before you trust any result?
- 1.2Click the FPS heading under the results and look at the Excluded count. How many faults did the software refuse? Find them in the file and explain what is wrong with them. (Compare each slickenline’s trend with the dip direction of its plane.)
Part 2 All the faults together 20 min
- Plot the P Axes and T Axes results on a stereonet, and contour each with Kamb.
- Click the P Axes heading and read the Inspector, then do the same for T Axes. Record the principal eigenvector E₁, the eigenvalues, Woodcock K and the Classification.
Quote E₁ for axes. P and T are axes, so a P axis plunging gently north and one plunging gently south are nearly the same measurement. The principal eigenvector handles that properly. Use it as the mean P or T throughout this lab.
Questions
- 2.1Give E₁ for the P axes and for the T axes. In words, what shortening and extension directions does the whole dataset suggest?
- 2.2Look at the contoured P axes rather than the numbers. Does it look like one population? What about the eigenvalues and the classification?
Part 3 Sorting by sense of slip 40 min
In the Data Library, set Group by to Kinematic sense. Make three new Analysis data sets and drag the groups onto them:
- Normal: normal, normal-dextral and normal-sinistral
- Dextral: dextral only
- Reverse: reverse, reverse-dextral and reverse-sinistral
Run Fault Kinematic Analysis on each set and fill in the worksheet. Pairs can split the three sets and swap results.
| Set | Faults | P (E₁) | T (E₁) | Classification of P |
|---|---|---|---|---|
| All faults | ||||
| Normal | ||||
| Dextral | ||||
| Reverse |
Questions
- 3.1Describe the deformation each set records: which direction shortened, which direction lengthened, and whether each of those is horizontal or vertical.
- 3.2Two of the three sets share almost the same P axis. Which two? What kind of deformation would produce both kinds of fault at once?
- 3.3The pooled P axis from Part 2 plunges moderately. Using the worksheet, explain where that plunge comes from, and why no single fault in the file needs to have a P axis like it.
- 3.4Which extension direction from the worksheet is missing from the pooled result in Part 2?
- 3.5The file also has seven sinistral or oblique-sinistral faults, which none of the three sets includes. Would you report a result for them on their own? Why or why not?
Part 4 Against the published interpretation 30 min
The paper is open access (reference below). Read the abstract and find the figures that summarize the fault kinematics.
- 4.1Find the published P and T axes for the dextral faults, the normal faults and for all the faults with observed sense. How close are yours? Suggest one reason why the published numbers of faults in each group differ slightly from yours.
- 4.2The authors describe the normal and dextral faulting as a gradual transition rather than two separate events. Could you tell those two possibilities apart from the fault-slip data alone? What evidence did they use to date the faulting?
- 4.3About two thirds of the faults in the full USGS release have a sense of slip that was inferred, not seen. Make the case for including them, then the case against. Which would you choose for a thesis?
blythe-faults-lab4.csv
128 faults · 10 kB · measurement, station, latitude, longitude, strike, dip, slickenline trend and plunge, kinematic sense, sense confidence, sense indicator. From USGS data release doi:10.5066/P9E3IKXE.
Request the answer key
We don’t publish the answers, so students can’t find them. The instructor pack has:
- worked answers to every question, including the completed Part 3 worksheet
- stereonets of the P and T axes for the pooled data and for each set
- the published values to compare against, and the mistakes students usually make
Email us from your institutional address with your name, your course and the lab you’re teaching.
Original dataset
Mavor, S.P., Bennett, S.E.K., Crow, R.S., Singleton, J.S., Langenheim, V., Stockli, D., Stelten, M., Brickey Sr., T.A., Umhoefer, P.J., and Beard, L.S., 2023, Digital data documenting the evolution of Miocene normal and dextral faulting in the lower Colorado River region near Blythe, California, USA: U.S. Geological Survey data release.
- Available from
- doi.org/10.5066/P9E3IKXE. Free, and no account is needed.
- Companion paper
- Mavor, S.P., and others, 2023, Evolution of Miocene normal and dextral faulting in the lower Colorado River region near Blythe, California, USA: Geosphere, v. 19, no. 5, p. 1180–1209, doi.org/10.1130/GES02608.1. Open access.
- File used
Blythe_structural_measurements.csv, rows with a slickenline and an observed sense of slip (128 of 642).- Terms of use
- U.S. federal government data release. Credit the USGS release and describe any changes if you republish it.
- Version used
- Published June 12, 2023.
- How our CSV differs
- Rows with inferred sense and rows without a slickenline removed; a measurement number added; sense codes written out as words (N as normal, R as dextral, TR as reverse-dextral, and so on). No orientation was altered.
Teaching labs with open structural data
- 1 Joints in the granite Joshua Tree
- 2 The fold axis of the Weissenstein Swiss Jura
- 3 Joint sets and structural domains Mesa Verde
- 4 Fault kinematics Blythe · You are here