Most first stereonet labs hand students five invented planes and a sheet of tracing paper. This one gives them the joints from a single block of Cretaceous granite, mapped by the U.S. Geological Survey, with dips from 14° to vertical and real joint sets hiding in the data. Everything below is ready to hand out. Instructors can request the answer key by email; the address is at the end of the lab.
Learning goals
By the end of the lab, students can:
- plot a plane as a great circle and as a pole on a lower-hemisphere equal-area net
- turn a right-hand-rule strike into a dip direction and a pole trend and plunge, with or without the net
- find the line where two planes meet and the angle between them
- pick out joint sets on a stereonet, and explain why two joints dipping in opposite directions can belong to the same set
Materials
- A printed equal-area (Schmidt) net, tracing paper, a pushpin and two colored pencils
- A clipboard or hardcover book and an ordinary pencil for Part 1
joshua-tree-joints-lab1.csv, 109 joint measurements (download below)- A laptop with Stereogram Pro open in a browser for Part 4
About the data
The U.S. Geological Survey mapped Joshua Tree National Park at 1:100,000, and the National Park Service later released that map as a public GIS database. This lab uses the joints from one block in the northeastern part of the park, between 34.00° and 34.10° N and between 115.50° and 115.40° W, an area of about 9 by 11 km.
All 109 joints sit in plutonic rock. The map puts 108 of them in Late Cretaceous granite and granodiorite (53 in the porphyritic phase, 41 in the equigranular phase, 14 in a unit the mappers labeled simply “jointed”) and one in Jurassic quartz monzonite. Dips run from 14° to vertical, with a median of 76°, so students plot planes of every steepness, not just the near-vertical ones most joint datasets are full of.
Strike follows the right-hand rule. Face along the strike direction and the plane dips to your right, so the dip direction is always the strike plus 90°. The file doesn’t say this anywhere, which is normal for published data and worth telling students.
Locations come from a 1:100,000 map and are good to about 50 m. That’s fine for a stereonet and too coarse for matching a measurement to a single outcrop.
Part 1 Before the net 15 min
Work in pairs. One person holds the clipboard; the other checks the orientation with a compass or phone.
Hold the clipboard as joint 250 from the dataset: strike 295°, dip 48°. Now stand a pencil on the clipboard at right angles to it, pointing down into the ground. That pencil is the pole to the joint.
- 1.1Roughly which compass direction does the pencil point, and is it steep or shallow?
- 1.2Tilt the clipboard until it’s vertical. What happens to the pencil? Where on a stereonet would a horizontal line plot?
- 1.3Lay the clipboard flat on the table. Where does the pencil point now, and where would it plot?
- 1.4Write one sentence connecting the dip of a plane to the plunge of its pole.
Part 2 Ten joints by hand 45 min
Plot the ten joints below on one sheet of tracing paper over the equal-area net. For each joint, draw the great circle in one color and the pole in another, then fill in the last three columns.
| # | ID | Strike | Dip | Unit | Dip direction | Pole trend | Pole plunge |
|---|---|---|---|---|---|---|---|
| 1 | 323 | 234 | 88 | Kcgp | |||
| 2 | 327 | 074 | 83 | Kcgp | |||
| 3 | 251 | 188 | 80 | Kcgp | |||
| 4 | 329 | 358 | 77 | Kcgp | |||
| 5 | 250 | 295 | 48 | Kcgp | |||
| 6 | 424 | 303 | 73 | Kcge | |||
| 7 | 420 | 132 | 27 | Kcge | |||
| 8 | 342 | 150 | 37 | Kcgp | |||
| 9 | 732 | 184 | 14 | Kcgj | |||
| 10 | 346 | 280 | 40 | Kcgp |
Questions
- 2.1Which great circle lies closest to the edge of the net? What does that tell you about the joint?
- 2.2Joints 3 and 4 have strikes of 188° and 358°. Where do their poles plot? Are the two joints nearly perpendicular or nearly parallel? Measure the angle between them before you answer.
- 2.3Group the ten poles by eye. How many groups do you see, and which joints are in each? Keep this answer; you’ll check it against the software in Part 4.
Part 3 Where two joints meet 20 min
Where two joints cross, they meet along a line. On the net, that line is the point where their great circles cross.
- 3.1Find the trend and plunge of the line where joints 1 and 3 intersect, and the angle between the two joints.
- 3.2Do the same for joints 5 and 7.
- 3.3One of your intersection lines is nearly vertical and the other is nearly horizontal. Sketch a block of granite cut by joints 1 and 3, and mark which edges of the block follow the intersection line.
Part 4 All 109 joints in Stereogram 40 min
- Import
joshua-tree-joints-lab1.csv. When the import asks what the orientation columns mean, choose Strike / Dip (RHR). - Open a stereonet and look at the joints as great circles. Then switch to Poles to planes.
- Turn on contours.
- In the stereonet settings, find Sets · all data and choose Density. Leave the other settings at their defaults.
Questions
- 4.1How many sets does the software find? Give the mean orientation (strike and dip) and the number of joints in each set.
- 4.2How many joints belong to no set? Click a few of them. Do they look like mistakes, or like real joints that don’t fit the pattern? Your joint 10 is one of them.
- 4.3Every set reports two angles, α95 and θ63. One describes how scattered the joints in the set are; the other describes how confidently the mean is known. Which is which? Which set’s mean do you trust least, and why?
- 4.4Compare the software’s sets with your groups from question 2.3. Where did you agree, and where did you split or merge something the software didn’t?
- 4.5Go back to the import and bring the file in again as Dip direction instead. Describe what happens to the plot. Which is correct, and how could you tell if nobody had told you the convention?
Part 5 Write-up 15 min
A park geologist needs a short description of the joints in this block for a rockfall hazard note. In five sentences or fewer, describe how many sets there are, how each one is oriented, and what shape of block they’d cut the granite into. Use numbers from Part 4.
Optional discussion. One set dips much more gently than the others. Suggest two ways a gently dipping set of joints could form in a granite pluton, and say what you’d look for in the field to tell them apart.
joshua-tree-joints-lab1.csv
109 joints · 9 kB · ID, strike, dip, latitude, longitude, map unit. Derived from NPS DataStore reference 2209598.
Request the answer key
We don’t publish the answers, so students can’t find them. The instructor pack has:
- worked answers to every question, with marking tolerances
- the correct Part 2 overlay, drawn to scale
- the joint sets the software finds, with their statistics and every pairwise intersection
- the mistakes students usually make, and where the lab is built to catch them
Email us from your institutional address with your name, your course and the lab you’re teaching.
Original dataset
Geologic Resources Inventory (GRI) program, 2022. Digital Geologic-GIS Map of Joshua Tree National Park, California (NPS, GRD, GRI, JOTR, JOTR digital map), adapted from a U.S. Geological Survey Open-File Report map by Powell, Matti and Cossette (2015). National Park Service Geologic Resources Inventory program, Lakewood, Colorado.
- Available from
- NPS DataStore reference 2209598: irma.nps.gov/DataStore/Reference/Profile/2209598. Free, and no account is needed.
- File used
jotr_geology_gpkg.zip(GeoPackage, 70 MB, opens in QGIS).- Layer used
JOTR_Geologic_Attitude_Observation_Localities, rows whose feature type names joints (356 of 2,588).- Terms of use
- U.S. federal government data, public domain. Cite the GRI product and the USGS source map if you republish it.
- Version used
- Issued November 7, 2022, retrieved September 24, 2026.
- How our CSV differs
- Joints inside the study block only (109 of 356), coordinates reprojected from UTM zone 11N to WGS 84 decimal degrees, and map unit attached by point-in-polygon join against the map’s unit layer. No orientation was altered.
Fisher, R. A., 1953. Dispersion on a sphere. Proceedings of the Royal Society of London A, 217, 295–305. The source of α95 and κ.
Powell, R. E., Matti, J. C. and Cossette, P. M., 2015. Geology of Joshua Tree National Park Geodatabase. U.S. Geological Survey Open-File Report 2015-1175, scale 1:100,000.
Teaching labs with open structural data
- 1 Joints in the granite Joshua Tree · You are here
- 2 The fold axis of the Weissenstein Swiss Jura
- 3 Joint sets and structural domains Mesa Verde
- 4 Fault kinematics Blythe